9
REMOTE CONTROL
The maximum distance that the remote control signal can be received is 5m.
There may be restrictions on signal reception if there are obstacles nearby.
The remote control does not work while charging the product.
·
·
Note
HOW TO INSERT THE BATTERIES
1
Remove the remote
control cover.
2
Insert the batteries as
shown in the picture.
3
Close the remote control
cover by sliding it until it
clicks.
Start/Stop
Start the auto cleaning or
stop the cleaning operation
Intensive Cleaning
Intensively cleans with
straight and rotating motions
Y Cleaning
Moves back and forth in
Y-shaped patterns and
cleans the floor
Water Control
Controls the amount of
water supplied to the
mop pads
Direction Control
Cleans the desired space in your own
pattern
Focused Cleaning
Intensively cleans a small
surrounding space
Edge Cleaning
Cleans the floor along walls and
corners
Residual Water Removal
Removes remaining water
inside the main unit
50min. Cleaning
Stops after cleaning for 50 minutes
Drain Water
Note
The water tank supplies a constant amount of water to mop pads through
electronic control.
The water supply level can be adjustted with the remote control. Each
time the button is pressed, it instructs the tank in the following order: cut
off water, Level 1, and Level 2.
You can check the selected level through the water level indicator on the
main unit.
·
·
·
Water Control
·
