Nordson Spectrum VT Feed Center, Product Manual

Page: 13 / 105

Description
2-1
Part 1611362 − 01
E
2018 Nordson Corporation
Section 2
Description
Introduction
The Nordson Spectrum
r
VT Feed Center conditions and supplies powder
for up to 36 powder spray guns, with a maximum of 32 automatic spray
guns and 4 manual spray guns. It contains a fresh powder feed system
using the Nordson dense phase technology/high density-low velocity, along
with an ultrasonic sieve, level sensors, reclaim circuit, and
electrical/pneumatic controls via a touch screen operator interface.
The Spectrum VT provides quick color changes and automatic purge
cleaning. The VT hopper receives reclaimed and fresh powder. The
powder is then sieved and sent to the spray guns using the Spectrum
Venturi (VT) inline powder feed pumps.
The Spectrum VT is offered in two configurations:
Configuration Hopper Hopper Capacity
in
3
(cm
3)
Components
Standard 300-mm Hopper 1343 (22000) Up to 18
pumps/spray guns
Large 425-mm Hopper 2686 (44000) Up to 36
pumps/spray guns
PD19386
Standard Configuration Large Configuration
Figure 2-1 Spectrum VT Feed Center Configurations