13
© 2021 Nordson Corporation
Installation
WARNING:
Allow only qualified personnel to perform the following tasks. Follow the
safety instructions in this document and all other related documentation.
Oil Change Kit Installation
The pump is shipped filled with oil. If you ordered an optional oil change kit, part 179490,
install the quick-disconnect fitting included in the kit on the oil drain tube on the left side of
the pump.
To do this without losing oil from the pump and making a mess, turn the system on its
side with the oil drain tube up, unscrew the drain cap from the tube and install the quick-
disconnect fitting on the tube.
Mounting
See Figure 6
for mounting base dimensions. Mount the pump system on a sturdy, flat
surface, such as a work bench or metal table.
33.5 in.
(850.9 mm)
32.0 in.
(812.8 mm)
9.0 in.
(228.6 mm)
10.5 in.
(266.7 mm)
0.535 in. Mounting Hole
4 Places
35.0 in.
(889.0 mm)
29.25 in.
(742.95 mm)
1.75 in.
(44.45 mm)
2.375 in.
(60.325 mm)
3/8-16UNC-2B
4 Places
Figure 6 Mounting Base Dimensions