Nordson Coolwave 2 T3, Instruction Sheet, Page: 3 / 8

Coolwave
r
2 T3 Transformer and Wire Harness Upgrade Kit
3
Part 1102354-02
E 2018 Nordson Corporation
Removing the Old Transformer Wires
NOTE: Removing the Old Transformer Wires is not required when
replacing transformers with Faston terminals.
Tools Required:
S
Wire cutter and stripper
S
Faston crimp tool
S
Extraction tool (refer to Parts section)
1. See Figure 4. Cut wires about 0.25” from the transformer winding. Cut
both red secondary wires and remove from harness.
2. Cut both black primary wires, but DO NOT remove. These wires are
used for the new transformer.
Red Secondary Wires
Black Primary Wires
Figure 4 Cutting Old Transformer Wires