Safety
1‐5
E
2010 Nordson Corporation
A1EN-01-[XX-SAFE]-10
Installation Practices
S
Install the equipment in accordance with the instructions provided in this
document and in the documentation provided with auxiliary devices.
S
Ensure that the equipment is rated for the environment in which it will be
used and that the processing characteristics of the material will not create
a hazardous environment. Refer to the Material Safety Data Sheet
(MSDS) for the material.
S
If the required installation configuration does not match the installation
instructions, contact your Nordson representative for assistance.
S
Position the equipment for safe operation. Observe the requirements for
clearance between the equipment and other objects.
S
Install lockable power disconnects to isolate the equipment and all
independently powered auxiliary devices from their power sources.
S
Properly ground all equipment. Contact your local building code
enforcement agency for specific requirements.
S
Ensure that fuses of the correct type and rating are installed in fused
equipment.
S
Contact the authority having jurisdiction to determine the requirement for
installation permits or inspections.
Operating Practices
S
Familiarize yourself with the location and operation of all safety devices
and indicators.
S
Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
S
Use the personal protective equipment (PPE) specified for each task.
Refer to
Equipment Safety Information
or the material manufacturer's
instructions and MSDS for PPE requirements.
S
Do not use equipment that is malfunctioning or shows signs of a potential
malfunction.
Maintenance and Repair Practices
S
Perform scheduled maintenance activities at the intervals described in
this document.
S
Relieve system hydraulic and pneumatic pressure before servicing the
equipment.
S
De‐energize the equipment and all auxiliary devices before servicing the
equipment.
S
Use only new or factory‐authorized refurbished replacement parts.
S
Read and comply with the manufacturer's instructions and the MSDS
supplied with equipment cleaning compounds.
Summary of Contents for CBC 5100
Page 6: ...Table of Contents IV P N 7135357D E 2010 Nordson Corporation CBC 5100 12 10 ...
Page 30: ...Description 2 10 P N 7135024D E 2010 Nordson Corporation CBC 5100 Edition 12 10 ...
Page 40: ...Installation 3 10 P N 7135024D E 2010 Nordson Corporation CBC 5100 Edition 12 10 ...
Page 54: ...Operation 4 14 P N 7135024 D 2010 Nordson Corporation CBC 5100 Edition 12 10 ...
