Nordson 765500, Manual, Page: 31 / 48

Maintenance
5-1
E
2001 Nordson Corporation
All rights reserved
Virgin Powder Drum Feed System
Issued 03/01
P/N 768600B
Section 5
Maintenance
WARNING: Allow only qualified personnel to perform the
following tasks. Observe and follow the safety instructions in
this document and all other related documentation.
WARNING: Breathing in certain airborne dusts (including
finishing powders) may be hazardous to health. Ask the
powder manufacturer for a Material Safety Data Sheet (MSDS)
for information. Use appropriate respiratory protection.
S
Clean and check Transfer pump(s) and syphon tube(s).
S
Vacuum any powder from the surrounding area to keep the work area
free from spilt powder.
S
Check and clean the locking mechanism.
S
Check condition of all air hoses and replace if necessary.
S
The unit should be tested for electrical safety, at intervals of not more
than 12 months, according to the Electrical safety at work act 1989 or
similar for non--UK countries.
1. Daily Maintenance
2. Weekly Maintenance
3. Yearly Maintenance