ValveMate 7100 Controller
4
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Introduction
IMPORTANT:
The primary control of deposit size is the valve open time. The ValveMate 7100 provides
easy access and “on the fly” adjustment of valve open time.
The ValveMate 7100 is an EFD dispense valve controller, incorporating programmable dispense time,
digital time readout, keypad programming for easy user interface and input / output communication with
host machine PLCs.
Other features include:
• Push-button time setting or one touch time programming
• Floating decimal, providing dispense time ranges of 0.001 to 99.9 seconds
• Bright red LED display
• Push-button purge feature
• Low air-pressure, optional tank low level detection, or other alarm detection devices
• End-of-Cycle feedback signal
The ValveMate 7100 has been designed with the machine builder and operator in mind. The objectives
are to bring dispensing control close to the point of application and to provide the features necessary to
make setup and operation as easy and precise as possible.
The ValveMate is easy to operate. Once you have reviewed the features, you will understand the benefits
and the ease of control the ValveMate provides.
As with all EFD products, the ValveMate has been produced to exacting specifications and thoroughly
tested prior to shipment.
To obtain maximum performance from this equipment, please read the instructions carefully.
