background image

Liquidyn V10D Controller

11

www.nordsonefd.com   [email protected]

   800-556-3484    Sales and service of Nordson EFD dispensing systems are available worldwide.

Specifications

NOTE:

 Specifications and technical details are subject to change without prior notification.

Item

Specification

Cabinet size

105

W

 x 68

H

 x 203

D

 mm (4.1

W

 x 2.7

H

 x 8.0

D

")

Weight

0.9 kg (2.0 lb)

Cycle rate

Up to 280Hz

Time range

2–10,000 ms 

Electrical power input

24 VDC, 0.3 Amp minimum

Electrical input connector

Lumberg KFV70

External power adapter

AC/DC power supply and power cord: 100–240 VAC, 50/60Hz, 1.4 Amp input; 
24 VDC, 2.5 Amp, 60 W maximum output

Internal voltage

24 VDC, 5 VDC

Feedback circuit

0 VDC (logical low)
24 VDC (logical high)

Housing

Aluminum

Ambient operating conditions

Temperature: 0–40° C (32–104° F)
Humidity: 10–80%
Storage temperature: -25–60° C (-13–140° F)

Product classification

IP40
Protection Class III

Approvals

CE, RoHS, WEEE, China RoHS

RoHS

标准相关声明

 (China RoHS Hazardous Material Declaration)

产品名称

Part Name

有害物质及元素

Toxic or Hazardous Substances and Elements

Lead 

 

(Pb)

Mercury 

 

(Hg)

Cadmium 

 

(Cd)

六价铬

Hexavalent 

Chromium 

(Cr6)

多溴联苯

Polybrominated 

Biphenyls 

(PBB)

多溴联苯醚

Polybrominated 

Diphenyl Ethers 

(PBDE)

外部接口

External Electrical 

Connectors

X

0

0

0

0

0

O:

表示该产品所含有的危险成分或有害物质含量依照EIP-A,EIP-B,EIP-C
的标准低于SJ/T11363-2006限定要求。

Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C is below 

the limit requirement in SJ/T11363-2006.

X:

表示该产品所含有的危险成分或有害物质含量依照EIP-A,EIP-B,EIP-C
的标准高于SJ/T11363-2006限定要求.

Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part, according to EIP-A, EIP-B, EIP-C is above 

the limit requirement in SJ/T11363-2006.

WEEE Directive

 

This equipment is regulated by the European Union under WEEE Directive (2012/19/EU). Refer to 

www.nordsonefd.com/WEEE

 for information about how to properly dispose of this equipment.

Summary of Contents for Liquidyn V10D























Reviews: