Nordpeis 22-Q23FL-000, User Manual, Page: 4 / 30

19
GB
:DUQLQJ,IWKHUHTXLUHPHQWVIRUYHQWLODWLRQDUH
127FRPSOLHGZLWKWKHFRROLQJDLUÀRZDURXQG
WKHSURGXFWZLOOEHFRQVLGHUDEO\UHGXFHGDQG
WKHSURGXFWFDQRYHUKHDW
7KLVFDQFDXVHD¿UH
3. Distance to combustible material
Firewall
(QVXUHWKDWWKHVDIHW\GLVWDQFHVDUHIXO¿OOHG
(FIG 1).
When connecting a steel chimney to the top outlet use
the security distances required by the manufacturer.
,PSRUWDQW:KHQSODFLQJWKHLQVHUWRQD
FRPEXVWLEOHÀRRUDVWHHOSODWHRIDWOHDVWPP
PXVWFRYHUWKHHQWLUHÀRRUVXUIDFHLQVLGHWKH
VXUURXQG$Q\ÀRRULQJPDGHRIFRPEXVWLEOH
material, such as linoleum, carpets etc. must be
UHPRYHGIURPXQGHUQHDWKWKHVWHHOSODWH
The insert expands when in use, and for this
reason the surround must NEVER rest on the
LQVHUWEXWKDYHDJDSRIDERXWPP7KH
insert must neither rest on the bench plate
RUDJDLQVWWKHVLGHV,WLVUHFRPPHQGHGWR
GU\VWDFNWKHVXUURXQGLQRUGHUWRDGMXVWWKH
LQVHUWSULRUWRSHUIRUDWLQJWKHFKLPQH\IRUWKH
ÀXHFRQQHFWLRQ
$VVHPEO\
Before the insert is removed from the pallet, remove the
accessories in the combustion chamber. To acess the
combustion chamber, do as follows:
1. Loosen the transport safety from the counterweight
and loosen the screw fastening the transport safety to
the product. Push the transport safety away from the
counterweight FIG 3A.
2. Make sure both wires are in place before opening the
door FIG 3B
3. Remove alle loose accessories from the combustion
chamber. Use the list of contents to make sure all parts
are included. Before lifting the product of the pallet,
secure the counterweight with the transport safety.
4. The insert is placed on two rails on top of the pallet.
In order to remove it from the rails and pallet, loosen
the screws and remove the brackets holding it in place.
Before lifting the insert of the pallet, fasten the screws
removed from the legs FIG 2.
Operational control
When the insert is in an upright position, and prior to
PRXQWLQJWKHVXUURXQG , check that all
functions are easy to use and appear satisfactory.
1. Adjust the legs. Make sure the insert is level.
2. Loosen the transport safety. Make sure the
wires holding the door are in place.
3. Make sure the door can be opened and closed
properly.
$WWHQWLRQ7KHSXOOH\VRQHDFKVLGHRIWKHGRRUDUH
FRDWHGZLWKVSHFLDOKHDWUHVLVWDQWJUHDVH,IDQHZ
JUHDVHLVQHHGHGFRQWDFWRQHRIRXUGHDOHUVWR
PDNHVXUHWKHULJKWW\SHRIJUHDVHLVXVHG
3XOOH\UDGLDWLRQVKLHOG),*
If the insert is connected to the smokepipe
sideways, attach the small radiation shield around the
pulley closest to the smokepipe.
,JLWLRQ $LUYHQWFRQWURO
A
B
$LUYHQWFRQWURO ,JQLWLRQSRVLWLRQ
QHGHWLOK¡\UH
Left position = closed
Right position = open
Fully to the right
6HOIFORVLQJGRRU
To make the door self closing, do as follows;
8VHDÀDWVFUHZGULYHUWRPRYHWKHWKUHHFODPSV
holding the weights in place outwards FIG 4(A)
5HPRYHWKHZHLJKW¿WWHWZLWKDKDQGOH),*%
3. Carefully push the clamps back in place.
&OHDQLQJWKHJODVV),*$%
If it becomes necessary to clean the glass, pull out the
two small handles above the door to keep it in place
FIG 5A. Pull out the lock handle on the left side of the
GRRUDQGRSHQWKHGRRU$IWHUFOHDQLQJWKHJODVV¿UVW
lock the handle on the left side of the door before
pushing the two small handles back in place.
&DXWLRQ%HFDUHIXOZKHQRSHQLQJWKHGRRU
VLGHZD\V6RPHVXUURXQGVKDYHPDUEOHZD[HG
FRQFUHWHSDUWVDQGJUDWHVTXLWHFORVHWRWKHGRRU
DQGERWKWKHGRRUDQGVXUURXQGLQJSDUWVPD\
VXVWDLQGDPDJHLIFDUHOHVVO\RSHUDWHG
Radiation shields, rear and around smoke collar.
7KHLQVHUWLV¿WWHGZLWKDUHDUUDGLDWLRQVKLHOGDQGD
separate shield around the smoke collar(FIG 6-7). To
utilize the rear or side connection, remove the cut in
the radiation shield. To keep the smoke collar radia-
tion shield in place, push the upper and lower cuts in
towards the smokepipe