LOUDSPEAKER / BI-WIRE JUMPER CABLES
Valhalla 2 Loudspeaker Cables are
terminated with Nordost’s own
gold-plated HOLO:PLUG® spade
and Nordost low-mass Z plug
Banana connectors. When installing
Valhalla 2 Loudspeaker Cables into
your system, do as follows: Attach
the connector wrapped in black (–)
to the black terminal on both the
power amplifier and loudspeaker.
Attach the connector wrapped in
red (+) to the red terminal on the
power amplifier and loudspeaker.
All Nordost cables are directional.
To ensure the highest quality
sound, the connectors marked
with directional arrows must point
towards the loudspeaker.
Valhalla 2 Loudspeaker Cables
are only available in shotgun
configuration. If you should have
equipment that requires either bi-
wire or bi-amp connections, invest
in Valhalla 2 Bi-Wire Jumpers.
Valhalla 2 Bi-Wire Jumpers are
an exact extension of Nordost’s
Reference Loudspeaker Cables,
ensuring
a
consistent
sonic
signature throughout your system.
ARROWS POINT IN
DIRECTION OF SIGNAL
ARROWS POINT IN DIRECTION OF SIGNAL
