2. GROUNDIN G
If you are experiencing any noise (hum) while listening to your
turntable set-up, you are most likely suffering from a ground
loop. In order to eliminate this problem, you must address the
grounding between your turntable and phono-stage. Most
turntables and phono-stages are equipped with ground screws
on their chassis. Connect the Bond Ground Wire (the wire
terminated with spade connectors that is permanently attached
to the tonearm cable) to the ground screws on both your
turntable and your phono-stage. This connection will bond the
two chassis together, creating a secure, low noise connection
between the two components.
TYR 2
TYR 2
PHONO-STAGE
TURNTABLE
Summary of Contents for TONEARM CABLE +
Page 1: ...INSTRUCTION MANUAL...
