Nordmende WM1201SL, User Manual

Page: 6 / 29

Water pressure of 0,1-1 MPa from your tap will enable your machine
to work more efficiently.(0,1 MPa pressure means water flow of more
than 8 litres in 1 minute from a fully opened tap)
After connection is complete, check for leakage by turning on your
tap completely.
Make sure that water inlet hoses can not become folded, damaged,
stretched or crushed when the washing machine is in its final
position.
Mount the water inlet hose to a ¾” threaded water tap.
Cold water inlet (White filter valve)
DRAIN CONNECTION
Make sure that water inlet hoses are not folded, twisted, crushed or
stretched.
The drain hose should be mounted at a minimum height of 60 cm,
and a maximum height of 100 cm from the floor.
The end of the drain hose can be connected directly to a drainage
stand-pipe or alternatively to a specific connection point designed for
that purpose on the waste outlet of a sink unit.
Do not extend the drain hose or your guarantee will be invalidated.
5