9
Wiring of the appliance must be performed by the Authorized Service. The appliance is
designed to connect to 220-240V~ electricity. If the mains electricity is different than the value
given, call the Authorized Service immediately. The appliance is designed
for using with plug
o
r for fixed connection to the mains. It is necessary that you install a double pole switch
between the product and the electricity supply (mains), with a minimum gap of 3 mm between
the switch contacts. (20A rated, delay function type).
The appliance is designed to connect to 220-240V~ electricity is different than the value
given above, call the Authorized Service immediately.
The Manufacturer Firm declares that its bears no responsibility whatsoever for any
kind of damage and loss arising from not complying with safety norms!
Figure 1
BLUE
BROWN
GREEN
3.4. GENERAL WARNING AND PRECAUTIONS
Your appliance is produced in conformity with the relevant safety instructions relating to
electrical appliances. Maintenance and repair works must be performed only by
Authorized Service technicians trained by the manufacturer firm. Installation and repair
works, performed without observing the rules may be dangerous.
The outer surfaces is heated while your appliance is operating. The elements heating the
inner surface of the oven and the steam out are extremely hot. These sections will continue
to preserve their heat for certain while even if the appliance is switched off. Never touch the
hot surfaces. Keep children away.
In order to cook in your oven, the oven function and temperature setting buttons need to be
adjusted and the oven timer, needs to be programmed. Otherwise, the oven will not
operate.
While the oven door is open, do not place anything on it. You may disturb the balance of the
appliance or break the door.
Unplug your appliance when it is not in use.
Protect your appliance from atmospheric effects. Do not leave it under the effects of the
sun,rain, snow, dust etc.
