background image

EN -

1

7

7.2. Cancelling a Programme

Follow the steps below to cancel a 

programme while in operation.

Press and hold the 

Start/Pause button 

for 3 seconds.

While the programme is cancelling, 

the Dry light will illuminate. The water 

discharge process will start and 

continue for 30 seconds.

When the programme is 

cancelled, the End light will 

illuminate.

7.3. Switching the Machine Off

Disconnect the plug and 

turn off the water tap.

When the End light illuminates, turn 

the Programme Selection knob 

to the 'Off' position to switch your 

machine off.

NOTE:

 Do not open the door before the 

programme is complete.

NOTE:

 Leave the door slightly open at 

the end of a wash programme to speed up 

the drying process.

NOTE:

 If the door of the machine is 

opened or the power is cut off during a 

wash programme, the programme will 

continue when the door is closed or when 

the power returns.

NOTE:

 If the power is interrupted 

or if the machine door is opened during 

the drying process, the programme will 

terminate and your machine will now be 

ready for a new programme selection.

Summary of Contents for E-CLV6540W






























Reviews: