10
After using any hob,please make sure that it is switched off.
Never touch any heating element, after it si turned off. Because, it keeps the heat
for a certain period.
Some ceramic models may have hot surface warning light.
Clean the hotplates with a wet cloth after using them.ýf there is excessively getting
dirty situation, you can clean it with water with detergent rather well.
If you will not use the hotplates for a while,apply a thin layer of machine oil on it for
an extended life.
Ceramic hob equipped with dual or oval zone heaters
CORRECT
WRONG
pot bottom is round
WRONG
pot buttom is small
WRONG
pot buttom does not sit well
Figure 9
Ceramic heating elements with dual or oval zone can be
operated with different zone sizes. For using all zones, the
heating element switch must be turned in the direction of
‘ ‘ symbol while it is in closed position. After that, required
heating level can be adjusted by continuing to rotate the
knob. If only one zone will be operated, the switch must be
turned from''0''position to ''1'' position. Then again, the
required heating level can be adjusted by continuing to
rotate the knob.
