Nordis 18K-36K, Instruction Manual

Page: 15 / 37

12
REMOTE CONTROL
SELF-CLEAN function (Optional)
Gentle Wind function (Optional)
Only optional for some heating pump inverter
appliance.
To active this function, turn off the indoor unit
at first, then press
CLEAN button
then you will hear a beep, AC will
appear on the indoor LED, and will
appear on the remote display .
1. This function helps carry away the accumulated
dirt, bacteria, etc from the indoor evaporator.
2. This function will run about 30 minutes, and it
will return to the pre-setting mode. You can
press button to cancel this function during
the process.
You will hear 2 beeps when it's finished or
cancelled.
It's normal if there is some noise during this
function process, as plastic materials expand
with heat and contract with cold.
1. Turn on the indoor unit, and change to COOL
mode, then long press
FAN and MUTE button
together 3 seconds to active this function,
will appear on the display.
Do it again to deactivate it.
2. This function will auto close the vertical flaps,
and give you the comfortable gentle wind feeling.
Health function (Optional)
1. Turn on the indoor unit at first, press HEALTH
to active this function, will appear on the
display.
Do it again to deactivate it.
2. When the HEALTH function is initiated, the
Ionizer/ Plasma/ Bipolar Ionizer/ UVC Lights
(depending on models) will be energized and
running.
8 heating function (Optional)
o
C
1. Long press ECO button over 3 seconds to active
this function, and ( ) will appear on
the remote display.
Do it again to deactivate this function.
o o
8 C 46 F
2. This function will auto start the heating mode
o
when the room temperature is lower than 8 C
o
(46 F), and it will return to standby if the
o o
temperature reaches 9 C (48 F).
o
3. If the room temperature is higher than 18 C
o
(64 F), the appliance will cancel this function
automatically.
Indoor unit
Outdoor unit
o o
Temp < 86 F (30 C)
o o o o
41 F (5 C) < Temp < 86 F (30 C)
We suggest operating this function at the
following ambient conditions to avoid certain
safety protection features.
It's suggested to utilize this function every
3 months.
ANTI-MILDEW (Optional)
1. In mode COOLING/ DRY, press ANTI-MILDEW
button to active this function, and will
appear on the remote display;
2.When turn off the air conditioner from the mode
COOLING/ DRY, the indoor unit will continue run
about 15 minutes to dry the indoor unit;
3.Press it again or select other modes to cancel
this function.