9
Problem: The interactive stand cannot be turned
on.
Solution:
If the interactive stand is operating from the
power supply, make sure the power supply is properly
connected (see assembly step 3). If the interactive
stand is operating from batteries, replace the batteries
(see assembly step 3).
If the interac-
tive stand still
cannot be
turned on, see
the drawing at
the right. Tip
the base onto
its side and
unscrew the
fuse cover.
Remove the
old fuse from
the fuse cover
and insert a
new 1 amp fast
blow fuse. Reattach the fuse cover.
Problem: The interactive stand does not respond
to the remote control.
Solution:
Make sure you are pointing the remote con-
trol at the interactive stand. If the interactive stand still
does not respond, replace the batteries in the remote
control and the interactive stand (see assembly steps
6 and 3).
Problem: The speakers do not function when the
CD player is used.
Solution:
The Line In mode of the interactive stand is
selected. Press and hold down the Play and Volume
increase buttons simultaneously for about five seconds
to switch from the Line In mode to the CD mode.
Fuse
Cover
Fuse
Base
