7
6. Identify the Right Upper Body Arm (9) and orient
it as shown.
If necessary, slide an Upper Body Arm Cover
(20) upward onto the Right Upper Body Arm (9).
Tip: Avoid pinching the wires.
Attach the Right
Upper Body Arm (9) to the Right Upper Body
Leg (6) with an M10 x 50mm Screw (95) and an
M10 x 45mm Hex Screw (78).
Next, connect the Right Grip Control Wire (129)
to the Right Control Extension Wire (133).
Tip:
The wire connectors should slide together
easily and snap into place with an audible
click. If they do not, turn one connector and
try again.
Then, press the Upper Body Arm Cover (20)
downward and turn it so that it is flush with the
Right Leg Front and Rear Covers (11, 15).
Repeat this step on the other side of the
elliptical.
6
9
78
95
20
6
5
61
A
2
4
5.
Tip: The wire connectors should slide
together easily and snap into place with
an audible click. If they do not, turn one
connector and try again.
While a second person holds the Console (4)
near the Upright (2), connect the Wires (A) to the
wires on the Console. Insert the excess wire into
the Upright.
Tip: Avoid pinching the wires.
Attach
the Console (4) to the Upright (2) with four
M4 x 16mm Screws (61);
start all the Screws,
and then tighten them.
11
15
129
133
Avoid
pinching
the wires
Avoid
pinching
the wires
