5
Install the iFit Sleep App and Pair Both Sensors
To use two sensors, two persons must have
iOS devices (iPhone® 4s and later)
or
Android devices (Android 5.0
and later)
that support BLUETOOTH 4.0 wireless technology.
Each person should visit the App Store℠ or the Google Play™ store, do a search for the free iFit Sleep app, and
install and open the app on his or her device. Each person should then touch
Join
to create an iFit account (or
touch
Log In
to log in to an existing iFit account);
each person must have a different iFit account on his or her
device.
One person should then follow the instructions in the iFit Sleep app to set up a sensor and pair and sync the
sensor to the app on his or her device.
After the first person does this,
the second person should set up the
second sensor and pair and sync it to the app on his or her device.
Following is a summary of the procedure:
1. Plug
one
of the small ends of the power cord fully into the
power port on
one
sensor;
do not plug the power cord
into the second sensor yet.
2. Make sure that the power cord is plugged fully into the
power adapter. Then, plug the power adapter into an
appropriate outlet that is close to your bed. The green
indicator on the sensor will light.
3.
Make sure that BLUETOOTH is enabled on the first
person’s device.
Hold the device close to the sensor,
and touch
Set Sensor
in the iFit Sleep app. After several
seconds, the sensor will pair with the app. The blue
indicator on the sensor will light.
4. Plug the other end of the power cord into the second
sensor. The green indicator on the sensor will light. Then,
repeat step 3 with the second person’s device.
Note: Each sensor can track only one person; each person
must use a different sensor.
5. See POSITION THE SENSOR on page 6.