background image

22

HOW TO CONNECT YOUR TABLET TO THE 

CONSOLE

The console supports Bluetooth connections to tablets 

via the iFit–Workouts at Home app and to compatible 

heart rate monitors. Note: Other Bluetooth connections 

are not supported.

1.   Download and install the iFit–Workouts at 

Home app on your tablet.

   On your iOS

®

 or Android™ tablet, open the App 

Store℠ or the Google Play™ store, search for 

the free iFit–Workouts at Home app, and then 

install the app on your tablet. Make sure that the 

Bluetooth option is enabled on your tablet. 

   Then, open the iFit–Workouts at Home app and 

follow the instructions to set up an iFit account and 

customize settings.

2.   Connect your heart rate monitor to the console 

if desired.

   If you are connecting both your heart rate monitor 

and your tablet to the console, you must connect 

your heart rate monitor before you connect 

your tablet. See HOW TO CONNECT YOUR 

HEART RATE MONITOR TO THE CONSOLE on 

this page.

3.   Connect your tablet to the console.

   Press the iFit Sync button on the console; the 

console pairing number will appear in the display. 

Then, follow the instructions in the iFit–Workouts at 

Home app to connect your tablet to the console. 

   When a connection is established, the LED on the 

console will turn solid blue. 

4.  Record and track your workout information.

   Follow the instructions in the iFit–Workouts at 

Home app to record and track your workout 

information.

5.   Disconnect your tablet from the console if 

desired. 

   To disconnect your tablet from the console, first 

select the disconnect option in the iFit–Workouts 

at Home app. Then, press and hold the iFit Sync 

button on the console until the LED on the console 

turns solid green. 

   Note: All Bluetooth connections between the con-

sole and other devices (including any tablets, heart 

rate monitors, and so forth) will be disconnected.

HOW TO CONNECT YOUR HEART RATE MONITOR 

TO THE CONSOLE

The console is compatible with all Bluetooth Smart 

heart rate monitors.

To connect your Bluetooth Smart heart rate monitor to 

the console, press the iFit Sync button on the console; 

the console pairing number will appear in the display. 

When a connection is established, the LED on the 

console will flash red twice. 

Note: If there is more than one compatible heart rate 

monitor near the console, the console will connect to 

the heart rate monitor with the strongest signal.

To disconnect your heart rate monitor from the console, 

press and hold the iFit Sync button on the console until 

the LED on the console turns solid green. 

Note: All Bluetooth connections between the console 

and other devices (including any tablets, heart rate 

monitors, and so forth) will be disconnected.

Summary of Contents for S25i





































Reviews: