9
7.
Attach the Top Cover (23) and the Bottom
Cover (24) to the Center Frame (7) with two
M4 x 15mm Screws (58) and an M4 x 30mm
Screw (63).
Attach the Center Frame Extension (6) to the
Center Frame (7) with two M10 x 53mm
Button Bolts (49) and two M10 Locknuts (65).
7
7
58
58
63
23
24
6
49
65
8.
Orient the Headrest Frame (9) and the
Backrest Frame (8) as shown. Attach the
Headrest Frame to the Backrest Frame with
two M10 x 16mm Button Screws (54).
9.
Grease an M10 x 95mm Button Bolt (53).
Pull the indicated Short Adjustment Knob (37)
out as far as it will go. Insert the bracket on
the Backrest Frame (8) into the Top Cover
(23). Next, attach the Backrest Frame to the
Center Frame Extension (6) with the M10 x
95mm Button Bolt (53) and an M10 Locknut
(65). Then, engage the Short Adjustment Knob
into one of the holes in the bracket.
See the inset drawing.
Attach an M8 x 16mm
Button Bolt (61) and an M8 Locknut (57) to the
hole in the end of the bracket on the Backrest
Frame (8).
8
9
8
54
54
9
6
23
Bracket
65
53
Grease
8
37
61
8
57
Summary of Contents for Revitalize 2.0 Inversion Bench
Page 17: ...17 NOTES...
