NordicTrack NTMC17, Manual, Page: 6 / 15

6
3 Charging

Plug the DC end of adapter to the micro USB port of
the device and plug the AC end to the wall socket for
charging.

Normally it takes approximately 5 hours to fully
charge the device. Operating the device during
charging with the AC adapter may extend the time of
full charging.

The adapter shall be installed near the equipment
and shall be easily accessible.
4 Inserting a Memory Card

The device supports micro SD/SDHC cards.

To insert a micro SD card, place the card connector
towards the front side of the device and the printing
side of the card towards the rear side of the device.

To remove the micro SD card, gently press the edge
of the card to release the safety lock and pull the
card out of the slot.
Notice