manualshive.com logo in svg

NordicTrack NTL89011.0, User Manual, Page: 12 / 36

Share
Download
NordicTrack NTL89011.0 User Manual Download Page 12

12

12.    IMPORTANT: To avoid damaging the Pulse 

Crossbar (81), do not use power tools and do 

not overtighten the #10 x 3/4" Screws (4).

   Orient the Pulse Crossbar (81) as shown. Attach 

the Pulse Crossbar to the Handrails (79) with 

four #10 x 3/4" Screws (4) and four #10 Star 

Washers (5). Start all four Screws, and then 

tighten them.

  

Make sure that the Upright Wire (91) isn’t 

pinched. Firmly tighten the four 5/16" x 2 3/4" 

Screws (12).

12

4

4

5

5

12

12

79

81

79

91

98

96

95

101

1

1

11

11.   Identify the Left and Right Trays (95, 96), which 

are marked “Left” and “Right.”

   Attach the Trays (95, 96) to the Console Base 

(98) with eight #8 x 1/2" Screws (1). Note: It may 

be easier to start the two inside Screws and then 

slide the Trays into place before tightening the 

other six Screws.

   Note: It may be necessary to rotate the Console 

Frame (101) upward when attaching the Trays 

(95, 96).

1

1

1

Summary of Contents for NTL89011.0





































Reviews:

No comments