9
8.
Press a 25mm Bushing (31) into each end of the
Locking Bar (20).
Insert the Barbell (21) through the Locking Bar (20)
until the Barbell is centered in the Locking Bar.
21
31
20
31
8
9.
Identify the Left Weight Glider (18) by looking at the
position of the round tube.
Press a 38mm Bushing (16) into each end of the
round tube on the Left Weight Glider (18).
Slide the Left Weight Glider (18) onto the left end of
the Barbell (21). Secure the Weight Glider to the
Barbell with a hand-tightened M8 x 20mm Screw (33).
Look at the drawing on page 4 to make sure that
you have correctly identified the left end. The Left
Weight Glider must be turned as shown in the
drawing.
33
18
16
21
Round tube
16
9
10. Press a 38mm Bushing (16) into each end of the
round tube on the Right Weight Glider (17).
Slide the Right Weight Glider (17) onto the right end
of the Barbell (21). Secure the Weight Glider to the
Barbell with a hand-tightened M8 x 20mm Screw (33).
Make sure that the Weight Glider is turned as
shown in the drawing.
21
16
17
16
33
10
Round
tube
4
Weight
Storage
Tube
Dumbbell
Storage
Rack
Pull-up Bar
Upright
Weight Guide
Weight Glider
Barbell
Safety Spotter
Right Side
Left Side
Note: The terms “right side” and “left side” are
determined relative to a person sitting on the
optional weight bench; they do not refer to
right and left on the drawings in this manual.
Thank you for selecting the versatile NordicTrack
®
GRT270 weight rack. Whether your goal is a shapely
figure, dramatic muscle size and strength, or a healthi-
er cardiovascular system, the NordicTrack
®
GRT270
will help you achieve the specific results you want. In
addition, the GRT270 can be used with the optional
NordicTrack
®
GRT200 weight bench, shown in the
drawing below. To order the NordicTrack
®
GRT200, call
1-888-825-2588
For your benefit, read this manual carefully before
using the NordicTrack GRT270 weight rack. If you
have additional questions, please call our Customer
Service Department toll-free at 1-888-825-2588,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is
NTBE04991. The serial number can be found on a
decal attached to the weight rack (see the front cover
of this manual).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Before You Begin
Optional NordicTrack
®
GRT200
Model No. NTBE01490
11. Identify the Left Safety Spotter (15) by the position of
the handle and the Left Spotter Hook (42). Place the
Left Safety Spotter on the left Base (4) so it is cen-
tered over the indicated hole.
Have a second person hold the Locking Bar (20) so
that the Left Weight Glider (18) rests on top of the
Left Safety Spotter (15). Insert a Weight Guide (11)
into the Left Weight Glider, the Left Safety Spotter,
and the hole in the Base (4). Note: Tilt the Weight
Guide away from the Upright (1) as you insert it.
Attach the Weight Guide (11) to the Base (4) with an
M8 x 60mm Bolt (23), two M8 Washers (35), and an
M8 Nylon Locknut (37). Do not tighten the Nylon
Locknut yet.
11
1
18
20
15
42
37
35
23
4
Hole
Handle
11
