13
16. The adjustable cushions are shipped at their firmest settings. Adjust each cushion to a softer setting
before using the treadmill (see page 28).
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 31 and 32).
14. Remove the packaging material from the bot-
tom of the Frame (56). See the inset drawing.
Make sure that the 1/2" Rear Leveling Foot Nuts
(30) are threaded all of the way onto the Rear
Leveling Feet (60). Then, turn the two Rear
Leveling Feet all of the way into the Frame.
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 29).
If one of the Rear Leveling Feet (60) doesn’t sit
flat on the floor, turn the Rear Leveling Foot until
it touches the floor, and then tighten the 1/2"
Rear Leveling Foot Nut (30) against the Frame
(56).
14
56
56
60
60
60
30
15. Press the Grommet (81) into the square hole in
the Base (97).
97
81
15