12
13
13. Orient the Rear Upright Cover (81) as shown.
While a second person holds the Rear Upright
Cover (81) near the Upright (4), connect the
Extension Wire (128) to the receiver wire (A).
Tip: Avoid pinching the wires. Attach the Rear
Upright Cover (81) to the Upright (4) with four
M4 x 16mm Screws (101).
Orient the Front Upright Cover (117) as shown.
Attach the Front Upright Cover (117) around the
Upright (4) by pressing it onto the Rear Upright
Cover (81).
101
128
A
81
4
117
Avoid
pinching
the wires
14
14. Identify the Right Upper Body Arm Front Cover
(65) and orient it as shown.
Attach the Right Upper Body Arm Front Cover
(65) to the Right Upper Body Leg (60) with two
M4 x 16mm Screws (101).
Identify the Right Upper Body Arm Rear Cover
(66) and orient it as shown.
Attach the Right Upper Body Arm Rear Cover
(66) around the Right Upper Body Leg (60) by
pressing it onto the Right Upper Body Arm Front
Cover (65).
Repeat this step on the other side of the
elliptical.
65
60
101
66
Summary of Contents for E 8.2
Page 30: ...30 NOTES...
