11
HOW TO USE THE MANUAL MODE
Insert the key fully into the console.
See GETTING STARTED on page 10.
Select the manual mode.
When the key is inserted, the manual mode will
automatically be selected. If a program has been
selected, press the Select Goal button repeatedly
until the words “MANUAL MODE” appear in the
main display.
Press the Start button or the Speed + button to
start the walking belt.
A moment after the button is pressed, the walking
belt will begin to move at 1 mph. Hold the handrails
and begin walking. As you exercise, change the
speed of the walking
belt as desired by
pressing the Speed +
and – buttons. Each
time a button is
pressed, the speed set-
ting will change by 0.1
mph; if a button is held down, the speed setting
will change in increments of 0.5 mph. To change
the speed setting quickly, press the 1-step Speed
buttons. The speed range is 0.5 mph to 12 mph.
Note: After the buttons are pressed, it may take a
moment for the treadmill to reach the selected
speed setting.
To stop the walking belt, press the Stop button.
The time will begin to flash in the main display. To
restart the walking belt, press the Start button or
the Speed + button.
Note: The first time the treadmill is used, inspect
the alignment of the walking belt, and align the
walking belt if necessary (see page 28).
Change the incline of the treadmill as desired.
To change the incline of
the treadmill, press the
Incline
▲
▲
and
▼
▼
buttons.
Each time a button is
pressed, the incline will
change by 0.5%. To change the incline quickly,
press the 1-step Incline buttons. The incline range
is 0% to 12%. Note: After the buttons are pressed,
it may take a moment for the treadmill to reach the
selected incline setting.
Follow your progress with the LED track, the
Training Zone display, and the main display.
The LED track—When
the manual mode or the
iFIT.com mode is se-
lected, the program dis-
play will show an LED
track representing 1/4
mile. As you exercise, the indicators around the
track will light, one at a time, until you have walked
or run 1/4 mile. A new lap will then begin.
The Training Zone display—As you exercise, the
Training Zone display will show the approximate
intensity level of your exercise. For example, if four
to six indicators in the display are lit, your intensity
level is ideal for fat burning.
The main display—The main display will show
the following information:
Incline—The left side of
the main display shows
the incline level of the
treadmill.
Time/Pace—When the
manual mode or the
iFIT.com mode is se-
lected, the next section
of the main display will
show the elapsed time
and your current pace (pace is measured in min-
utes per mile). The display will change from one
number to the other every few seconds; the Pace
indicator will light when your pace is shown. When
a program is selected, the display will show the
time remaining in the program, your current pace,
and the time remaining in the current segment of
the program.
5
4
3
2
1
