NordicTrack C80I NETL79815.0 User Manual Download Page 23

23

   The workout will function in the same way as the 

manual mode (see page 18).The workout will 

continue until you reach the goal that you set. The 

walking belt will then slow to a stop.

   Note: The calorie goal is an estimate of the 

number of calories that you will burn during the 

workout. The actual number of calories that you 

burn will depend on various factors such as 

your weight.

4.  Follow your progress with the displays.

  See step 5 on page 19.

5.  Measure your heart rate if desired.

  See step 6 on page 20.

6.   When you are finished exercising, remove the 

key from the console.

  See step 7 on page 20.

THE OPTIONAL CHEST HEART RATE MONITOR

Whether your 

goal is to 

burn fat or to 

strengthen your 

cardiovascular 

system, the key 

to achieving the 

best results is 

to maintain the 

proper heart 

rate during your 

workouts. The optional chest heart rate monitor will 

enable you to continuously monitor your heart rate 

while you exercise, helping you to reach your personal 

fitness goals. 

To purchase a chest heart rate moni

-

tor, please see the front cover of this manual.

Note: The console is compatible with all BLUETOOTH 

Smart heart rate monitors.

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console 

sound system while you exercise, plug a 3.5 mm male 

to 3.5 mm male audio cable (not included) into the jack 

on the console and into a jack on your MP3 player, 

CD player, or other personal audio player; 

make sure 

that the audio cable is fully plugged in. Note: To 

purchase an audio cable, see your local electronics 

store.

 

Next, press the play button on your personal audio 

player. Adjust the volume level using the volume 

increase and decrease buttons on the console or the 

volume control on your personal audio player.

If you are using a personal CD player and the CD 

skips, set the CD player on the floor or another flat  

surface instead of on the console.

HOW TO ADJUST THE CUSHIONING SYSTEM

The treadmill features a cushioning system that 

reduces the impact as you walk or run on the treadmill. 

Remove the key from the console and unplug the 

power cord. 

In order to adjust the cushions, you may 

need to place the treadmill in the storage position (see 

HOW TO FOLD THE TREADMILL on page 25).

For more firmness, turn a cushion to the position 

shown in drawing 1; for less firmness, turn the cushion 

to the position shown in drawing 2. Adjust the other 

cushions in the same way. 

Note: Make sure that the 

cushions on the left and right sides of the treadmill 

are set to the same firmness level. The faster you 

run on the treadmill, or the more you weigh, the 

firmer the walking platform should be.

More firm

Less firm

1

2

Summary of Contents for C80I NETL79815.0





































Reviews: