10
7. Start four #10 x 3/4" Screws (9) with four #10
Star Washers (32) into the Pulse Bar (112) and
the Handrails (87).
Slide the Pulse Bar (112) as far in the direc-
tion shown as possible, and then tighten the
#10 x 3/4" Screws (9). Do not overtighten the
Screws.
Remove the wire tie from the Upright Wire (81).
Insert the pulse wire (E) from the Pulse Bar (112)
through the looped Cable Tie (99) on the right
handrail assembly (C), and pull the pulse wire
tight. Tighten the Cable Tie, then cut off the end
of the tie.
9
32
Wire
Tie
81
9
32
7
112
E
99
87
87
8. Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Remove the four indicated 1/4" x 1/2" Screws (4)
from the Console Frame (104). The Screws will
be used in a later step.
Attach the Left and Right Cup Holders (36, 27)
with eight #8 x 1/2" Screws (1). Tighten the four
indicated Screws first. Do not overtighten the
Screws.
Console
Assembly
1
8
4
4
1
1
104
1
27
36
C
Tighten
First
Tighten
First
