manualshive.com logo in svg

NordicTrack 9600 Spn Dom Treadmill, Manual, Page: 10 / 44

Share
Download
NordicTrack 9600 Spn Dom Treadmill Manual Download Page 10

10

HOW TO CONNECT THE POWER CORD

This product must be grounded. 

If it should malfunc-

tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock.  

This product is
for use on a dedi-
cated, 20-amp,
120-volt circuit.
No other appli-
ance should be
on the same cir-
cuit. This product
is equipped with
a cord having an
equipment-
grounding
conductor and a grounding plug. Plug one end of the
cord into the treadmill as shown in drawing 1. Attach
the cord bracket over the cord with two bracket screws.

Plug the grounding plug into a standard NEMA 5-20 
receptacle as shown in drawing 2. Do not modify the
plug or the receptacle. Do not use an adapter, a surge
protector, or an extension cord.

HOW TO CONNECT A CATV CABLE

If your treadmill has the Workout TV console,

a

CATV cable must be connected to the treadmill for
cable TV stations to be viewed. 

Locate the cable
jack on the front of
the treadmill.
Connect the CATV
cable to the cable
jack. Route the
cable so that it will
not be pinched or
crushed by the
wheels when the
incline is changed. 

A satellite receiver, VCR, or DVD player can also be
connected to the treadmill. Connect a CATV cable
from the coaxial output on your equipment (usually
labeled TV OUT or RF OUT) to the cable jack on the
front of the treadmill.

Note: Audio/video equipment without coaxial outputs
(some satellite receivers and DVD players) will require
an RF modulator to work correctly with the treadmill.
RF modulators are not available from FreeMotion
Fitness, but are available at electronics stores. See the
owner's manual for the equipment you wish to connect
to determine if an RF modulator is needed, or contact
your local audio/visual service provider.

DANGER:

Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet 
installed by a qualified electrician. Do not use
an adapter to connect the plug to an improper
receptacle.

H

OW TO

C

ONNECT THE 

T

READMILL

1

Cord

Bracket

Bracket

Screws

Cable Jack

NEMA 5-20

Receptacle

1

Summary of Contents for 9600 Spn Dom Treadmill













































Reviews:

No comments