10
HOW TO CONNECT THE POWER CORD
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock.
This product is
for use on a dedi-
cated, 20-amp,
120-volt circuit.
No other appli-
ance should be
on the same cir-
cuit. This product
is equipped with
a cord having an
equipment-
grounding
conductor and a grounding plug. Plug one end of the
cord into the INCLINE TRAINER as shown in drawing
1. Attach the cord bracket over the cord with the in-
cluded allen wrench and the two bracket screws.
Plug the grounding plug into a standard NEMA 5-20
receptacle as shown in drawing 2. Do not modify the
plug or the receptacle. Do not use an adapter, a surge
protector, or an extension cord.
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. Do not use
an adapter to connect the plug to an improper
receptacle.
H
OW TO
C
ONNECT THE
I
NCLINE
T
RAINER
1
Cord
Cord
Bracket
Bracket
Screws
NEMA 5-20
Receptacle
1
Summary of Contents for 8600
