24
HOW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect a 75 ohm CATV cable to the 75 ohm
terminal on the treadmill, a VCR or DVD player to
the audio/video input jack, or a personal audio
player to the audio jack below the television on the
console. See page 13 for instructions.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
16.
2. Press the Power button to turn on the televi-
sion, and press the AV button to select a televi-
sion source.
Press the Power button repeatedly until the word
TUNER appears on the screen. Next, select a tele-
vision source by pressing the AV button repeat-
edly. If you have connected a 75 ohm CATV cable
or a VCR to the 75 ohm terminal on the treadmill,
press the AV button until the word TUNER appears
on the screen. If you have plugged a DVD player
or a VCR into the three audio/video RCA jacks,
press the AV button until the words INPUT 1 ap-
pear. If you have connected a personal audio
player to the audio plug below the television on the
console, press the AV button until the word MP3
appears. Note: To turn off the television, press the
Power button until the word CONSOLE appears.
3. Press the Channel buttons to select the desired
channel.
Note: Complete this step only if you are using ana-
log cable. Otherwise, change channels through an
external source such as your cable box or your
VCR.
When the television is turned on, the screen will
show the last channel that was selected. To select
a different channel, press the Channel (CH.) but-
tons. The selected channel number will appear on
the screen for a few seconds. Note: The television
is equipped with a channel memorizing function
that allows you to go directly from the current chan-
nel to the next channel saved in memory. Before
channels can be selected in this way, they must be
saved in the televisionʼs memory. See THE IN-
FORMATION MODE on page 25.
4. Press the Volume buttons to adjust the volume.
When either Volume (VOL.) button is pressed, the
volume level indicator will appear on the screen for
a few seconds.
To use earphones or headphones (not included),
plug them into the headphone jack below the key
on the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or personal audio player to the console.
Locate the audio plug below the television on the con-
sole, and plug it into a jack on your MP3 player, CD
player, or personal audio player.
Make sure that the
audio plug is fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or personal audio player. Then, adjust the vol-
ume on your MP3 player, CD player, or personal audio
player. You can also adjust the volume on the console
by pressing the Volume increase and decrease but-
tons.
If you are using a personal CD player or a DVD player
and the CD or DVD skips, set the CD player or DVD
player on the floor or another flat surface instead of on
the console.