8
3. With the help of a second person, carefully tip
the incline trainer down so that the Base (78) is
flat on the floor.
Attach a Wheel (77) to each side of the Base
(78) with a 3/8" x 2 1/2" Bolt (4) and a 3/8" Nut
(8) (only one side shown).
3
4
8
77
78
4. Have a second person hold the Left Handrail
(69) near the Yoke (88). Locate the wire tie in-
side the Yoke. Wrap the end of the wire tie
around the Left Pulse Wire (70).
Pull the other end of the wire tie until the Left
Pulse Wire (70) is extending from the hole in the
Yoke (88). At the same time, slide the Left
Handrail (69) into the Yoke.
Make sure not to
pinch the Left Pulse Wire
.
Attach the Left Handrail (69) to the Yoke (88)
with two 5/16" x 3/4" Bolts (6);
do not fully
tighten the Bolts yet.
Repeat this step with the Right Handrail (75)
and the Right Pulse Wire (71).
4
6
70
75
6
71
88
Wire
Ties
69
