10
4. Set the Uprights (83) on the Base (74).
Make
sure that the hole with the Upright Wire (75)
is on the right side.
Attach the right Upright (83) to the Base (74) with
four of the 3/8" x 2 3/4" Screws (22) that you just
removed and four 3/8" Star Washers (3).
Make
sure that the Base Wire (52) is not pinched.
Do not fully tighten the Screws yet.
Attach the left Upright (not shown) in the
same way.
Note: There is not a wire on the
left side.
Fully tighten all eight 3/8" x 2 3/4"
Screws (22).
3. Remove the four 3/8" x 2 3/4" Screws (22) from
the Uprights (83). Save the screws.
3
83
22
22
4
22
3
3
52
74
75
22
83
3
3
Summary of Contents for 24928.0
Page 5: ...5 ...
