10
NORDIC
ORDERING SPARE PARTS
Please provide the following information on all orders for spare parts:
• Model/type of the equipment
• Part number of the required spare part
STORAGE
Store the equipment and accessories in a dark and dry place at above freezing temperature. The ideal
storage temperature is between 5 and 30°C. Store the electric tool in its original packaging.
TROUBLE-SHOOTING
If the vacuum vibrates abnormally, stop motor immediately. Abnormal vibration usually indicates a
mechanical problem, continued operation could lead to injury or damage.
Note:
The distributor will not be responsible for any damage or injuries caused by the repair of the vacuum
by an unauthorized person or by mishandling of the vacuum. This tool is designed for DIY use - use in
commercial or industrial environments will void the warranty.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
Vacuum is
not starting
Battery is low in charge
Charge battery
Battery is not inserted properly
Insert battery pack correctly
Possible clogging
Empty the debris tank and clean the filter
Vacuum is not
operating at full
capacity
Debris tank is full
Empty the debris tank
Filter is clogged
Clean/replace the filter
Nozzle/ hose is blocked
Check, and clean the nozzle/hose
Battery is low in charge
Charge battery
Motor stops
while vacuuming
Battery has no power
Charge the battery
The battery pack
fails to charge
No good contact at the charging contacts.
Repeat the charging action: Insert the power
plug of the charger into the socket outlet, Insert
the battery pack into the battery charger
The battery pack is warm or not, The battery
protection system will not allow the battery to
be charged if the battery temperature is over
40° after use.
Allow the battery pack to cool to room
temperature before commencing with the
charging.