Pic.40 Heart rate synchronization interface Pic.41 Heart rate segment status
Pic.42 Home heart rate interface
2.Dynamic heart rate
In the heart rate interface,clicks on Detailed, you can enter the dynamic
heart rate test interface (the heart rate test mode of the watch should be
changed to "Auto"), and then click Start, the view will draw the heart
rate map corresponding to the time period; as shown in Pic 41, if the
start button is clicked, but the watch does not start the dynamic heart
rate function. After ten seconds, you will be prompted not got the data
set. Please wear the device correctly and turn on the dynamic heart rate
function. Click the start button to measure the dynamic heart rate, you
need to test for more than 17 seconds to save the dynamic heart rate
data, click the Close button will pop up the notice whether to save the
heart rate data, as shown in Pic42; Click YES (Pic.42) to see the dynamic
heart rate graph of the test, as shown in Pic 43.(warm reminder: the
start and close of the dynamic heart rate test on the APP can only
control the APP end, please close the watch end manually after the test
is completed, Otherwise, high power consumption will occur).
