Page 44 of 62
nRF51822 Development Kit User Guide v1.4
8. In the
Utilities
tab, select
Use Target Driver for Flash Programming
.
9. Choose the available debugger from the list as shown in
.
Figure 29
Debugger selection
6.2.6
Erasing the device
The code memory area available for the user application can be erased by doing the following:
1. In the Target options dialog select the
Utilities
tab.
2. Click
Settings
and select
Erase Full Chip
.
3. Uncheck
Program
and
Verify
.
A normal download procedure will erase the device application code memory area.
Figure 30
Erasing
Note:
To erase the whole device, including the SoftDevice, refer to
for
instructions.