background image

For outdoor use only! Do not use under awnings, canopies, parasols or the like.

Place grill on a firm, even and stable surface at a safe distance from buildings, trees and other flammable 
materials.

Never move the grill when in use. 

The grill can be extremely hot when in use. Use grill gloves or other heat-resistant gloves when grilling to 
avoid burns. 

Only use grill implements made of heat-resistant materials. 

We recommend using grill lighter briquettes, a grill starter or electrical grill starter for the most effective, 
clean and safe way to start your grill. If using lighter fluid, do not ignite if there is any fluid on the outside 
of the grill, the area around it, on your own clothes etc. 

Do not use ethanol or petrol to light or relight charcoal or lighter briquettes. When using fluids to start a 
grill, ensure they approved according to EN 1860-3. 

Never relight the grill with any form of fluid, not even lighter fluid, as the charcoal can still be smouldering
and cause large flames, a fire hazard and damage the grill.

Always check that charcoal or briquettes are fully extinguished before removing ash.

Never leave a grill in use or that has just been used without ensuring that all charcoal is fully 
extinguished.

Let the grill cool down for at least 24 hours before emptying it, or empty used charcoal/briquettes into a 
metal container. Never empty used charcoal/briquettes directly onto the ground. 

Flames can shoot up if hot fat or food falls on to burning charcoal/briquettes. Always have water available 
to put out any such flames. 

Remember the danger of fire.

Do not use the grill in strong winds.

Always have a bucket of water to hand when grilling. 

Never leave a lit grill unsupervised.

Wait until a white layer of ash covers the charcoal/briquettes before grilling.

Do not empty used charcoal or briquettes back into the pack. 

Keep charcoal and briquettes dry and well ventilated and at a safe distance from heat sources. 

Every effort has been made to remove sharp edges during manufacture, but we recommend checking the 
grill and wearing gloves if necessary when assembling.

2

WARNING!

DANGER OF CARBON 

MONOXIDE POISONING!

Burning charcoal indoors can be 
fatal. Carbon monoxide is released 
- an odourless gas. NEVER burn 
charcoal in a enclosed area, such 
as a dwelling, car or tent.

Failure to comply with the 
instructions and warnings in this 
manual, and to exercise caution 
when using the grill, can cause fire, 
explosion, serious injury or death, in 
addition to material damage.

WARNING! 

Keep children, animals and anyone else who needs supervision at a safe 

distance from the grill. The grill can be extremely hot. 

WARNING! 

Never move the grill once lit or while it is still hot.

WARNING! 

Do not touch the grill body when lit, it can be extremely hot and there is a risk of 

burns. 

WARNING! 

Do not use fluids such as spirits, petrol, diesel, paraffin or alcohol for lighting or 

relighting the grill. We recommend the use of lighting briquettes or electrical grill lighters.

SAFETY INFORMATION! 

Summary of Contents for CO201710













Reviews: