Innehållsförteckning
Buffalo 3
TURNING OFF THE GRILL
Switch off the gas supply at the bottle,
then turn all control valves to the
“Off” position.
Wait until the barbecue is sufficiently cool
before closing the hood.
Lighting instructions
MANUEL IGNITION
If the grill will not light using the
ignitor button, use the following
procedure for manual lighting.
Use a long match or lighter.
1. Always keep lid open during
lighting.
3. Place a match between the
coils on the end of the lighting
rod, light the match and insert it
into the hole of firebox to ignite.
4. Push and turn the knob to
“MAX” position, and make sure
the burner lights and stays
lighted.
5.Repeat 3~4 to light other
burners.
NEVER DOUSE THE
GRILL WITH WATER
WHEN THE SURFACES
ARE HOT.
IF THE GRILL WILL NOT LIGHT USING
NORMAL OR MANUAL LIGHTING,
REFER TO THE TIPS SECTION IN THE
TROUBLESHOOTING MANUAL, OR
CONTACT YOUR DEALER.
!
Flames should be blue
and stable. If the flames are
large and yellow, flaring or
’broken’, check the
troubleshooting manual.
NB! Make sure to insert an AA-battery (not included)
in the ignitor.
1
ALWAYS KEEP LID OPEN WHEN LIGTHING THE
GRILL
2
Check that all controls are in the ”OFF” position.
3
Open the gas supply valve on the regulator.
4
Push and hold the ignitor button, at the same
time push and turn any control knob slowly
to ”MAX” position. Press the ignitor button until
the grill is lit. If the burner do not to light within
5 seconds, shut down the gas supply and wait 5
minutes, then, repeat the procedure.
5
If the burner will not ignite after repeatedly
attempts, use a match and do a manual ignition.
6
When the first burner is lit, ignite the next
burner. Ignite one burner at a time in the same
way as step 4. Make sure one burner is lit before
igniting another.
7
Always preheat the grill on max temperature for
10 minutes (lid must be closed) before placing
food on the cooking grid.
20
