GB
1. The installation and replacement of the batteries.
Turn left
Turn right
Stop
Forward
Reverse
LED Indicator
Direction for use
2. Matching the frequency of car and remote control.
Speed
The remote control operation always prior to the toot pedals operation. (The foot pedal won´t work
while operating remote control)
1. Turn off the Power Switch on the car.
2. Remove the battery cover on the Remote Control and put in 2 AAA battery, the three LED
indicators will flash.
3. Turn on the Power Switch on the car, when the LED indicators stop flashing and 2 of them are
on, matching successes.
4. Once the matching is made, there is no need to match code again only if the battery is
replaced.
5. The Remote Control will enter a sleep mode if not used for a long time and the LED indicators
will be off. Press any buttons to wake up the Remote Control, and it can be used normally.
