7
User Manual
EN
Cleaning the air outlet filter
1. Push the air outlet grille latch upwards to open the grille.
Remove the air outlet filter.
2. Clean the grille and filter under running water. Allow them to
dry completely before replacing them in the appliance.
Rewinding the Power Cord
When not in use, unplug the appliance from the mains socket
and then press the cord rewind button to feed back the power
cord.
CAUTION:
Take special care to rewind the mains cord by
holding the plug to avoid injury by a whipping action.
Storage
Insert the holder of the floor brush with tubes into the storage
clip at the rear or the bottom of the appliance.
Troubleshooting
Please check the following details before you have your
appliance repaired by an authorised servicing agent.
Problem
Possible Cause
Possible
Solution
Vacuum cleaner
does not power
on.
1. Check if the
power plug is
firmly inserted
into the power
outlet.
2. Check if the
power switch of
the appliance
is on.
1. Insert the
plug back into
the power outlet
and ensure it is
switched on.
2. Then turn the
vacuum power
switch on.
Suction power
becomes weak.
1. Check if the
hose, brush or
tube is clogged or
damaged.
2. Check if the
dust tank is full.
3. Check if the
filter is clogged
and if the tubes
are correctly
attached.
1. Immediately
remove the
obstruction.
2. Empty the dust
tank.
3. Clean the filter
or reassemble the
tubes.
Power cord will
not fully feedback.
Check if the
power cord is
twisted.
Pull out the power
cord at its optimal
length and
rewind it.
Power cord
cannot be pulled
out.
The power cord
may be twisted.
Rewind or pull the
cord in and out
several times by
pressing the cord
rewind button.
No suction power
regulation.
The suction
power regulation
device may be
faulty.
Restart the
appliance
several times. If
it still does not
work, contact
an authorised
servicing agent.
