4
Schematic Drawing of Structure:
(1). Nozzle
(2). Water tank
(3). Aroma chip
(4).
Knob
(5). Water tank cover
(6). Indicating light
(7). Power cord
(8). Transducer
Operation instruction
Operation condition
1) The working environment for humidifier is when temperature
is between 5˚C to 45˚C degrees Celsius, and relative humidity
is lower than 80%.
2) Keep machine working under low mist level when room
relative humidity is higher than 70% or in an enclosed room
space.
3) Use clean water and lower than 40 °C.
4) Clean water tank and water flume when use again after a
long time.
Operation steps
1) Get the water tank out of the machine, unscrew the water
tank cover and fill the tank with water, then screw back the
User Manual
EN
water tank cover tightly. Put the water tank on the machine
base steadily.
2) Inspect whether the mist outlet nozzle is put well on the
water tank.
3) Plug in the power, turn the knob clockwise and machine
starts to work. Adjust the mist output from minimum to
maximum by turning the knob clockwise. To adjust the mist
output from maximum to minimum and to turn off the machine,
turn the knob counter clockwise.
4) When out of water, the indicating light turns red and the
machine stops working .Refill the tank then turn on the machine
to have machine work again.
5) During operation, machine will stop working when take off
the tank. Machine will resumed when water tank placed again.
6) You can using aroma function by adding few drops of scent
to aroma chip.
Cleanness & Maintenance
Before cleaning, turn the functional knob point to “OFF”, take
off the plug
1) Transducer
- The water quality in someplace is too hard so that the
transducer surface will be easy to scale formation, the users
need to clean transducer with cleaning agent.
- Add little cleaning agent on the transducers surface then put
water into the sink. Let the sink soak fully for 10-15 min.
- Clean with brush until the rest of water disappear.
- Clean twice with water.
- Don’t clean transducer by any metal or stiffness material or
scrape it to avoid any damage.
2) Water tank inside
- Clean inside and sink of water tank twice per week at least
when use machine frequently.
- Use soft cloth wipe for cleaning the water tank.
- There will be some dirt stick to the tank inside wall, which can
be cleaned with scouring pad, Clear the scour completely.
- Don’t use acid, thinner or other corrosive substances.
3) Water sink inside
- Take out the water in sink, clean the scale by brush, then
wiped by damp cloth.
- Wash it by water.
- Don’t pour water in sink directly when cleaning the water
sink inside.
- Don’t use acid scour to wash the water sink inside to avoid
damage on transducer.
4) Body and water tank outside
- Wipe it with soft cloth, use soft scour when any dirty