Nordic Aluminium Global trac Htek Series, Installation Instructions Manual

Page: 1 / 8

series
Htek
2-circuit 277V Lighting Track
with independent neutra ls
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When installing or using this track system, basic s afety precautions should always be
followed, including the following :
1. Read all of these installation instructions before i nstalling the GLOBAL Htek 277V lighting
track system
2. The GLOBAL Htek 277V track system is intended for use only wit h GLOBAL Htek
components and fixtures marked for use with GLOBAL Htek system. To reduce risk of fire
and electric shock, do not use other components as part of this s ystem.
3. Track installation is to only be performed by a cert ified electrician in accordance with the
National Electrical Code and all local codes and ordinances.
4. The GLOBAL Htek system is designed to be fed by two branch circuit s rated 277VAC,
20A, eg. the system is a two-circuit / two-neutral tr ack and care must be taken to keep
circuits designated as circuit1 and circuit2 s eparate.
5. Do not install the track in damp or wet locations.
6. Do not install any parts of the track system less than 8 ft above t he floor.
7. Do not install any fixtures closer than six inches f rom combustible materials.
8. Do not use this track with a power supply cord or convenience recept acle adapter.
9. Do not install the track with electric power connect ed. Similarly, disconnect electricity
when installing or removing fixtures or components or changing the configuration of the
track.
10. Do not attempt to energize anything other than Lighting T rack Fixtures on the track. To
reduce the risk of fire and electrical shock, do not att empt to connect power tools,
extension cords, appliances and the like to the trac k.
SAVE THESE INSTRUCTIONS
HTEK page 1(8)
series
Installation instructions D2427e
Htek
2-circuit 277V Lighting Track
with independent neutra ls
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When installing or using this track system, basic s afety precautions should always be
followed, including the following :
1. Read all of these installation instructions before i nstalling the GLOBAL Htek 277V lighting
track system
2. The GLOBAL Htek 277V track system is intended for use only wit h GLOBAL Htek
components and fixtures marked for use with GLOBAL Htek system. To reduce risk of fire
and electric shock, do not use other components as part of this s ystem.
3. Track installation is to only be performed by a cert ified electrician in accordance with the
National Electrical Code and all local codes and ordinances.
4. The GLOBAL Htek system is designed to be fed by two branch circuit s rated 277VAC,
20A, eg. the system is a two-circuit / two-neutral tr ack and care must be taken to keep
circuits designated as circuit1 and circuit2 s eparate.
5. Do not install the track in damp or wet locations.
6. Do not install any parts of the track system less than 8 ft above t he floor.
7. Do not install any fixtures closer than six inches f rom combustible materials.
8. Do not use this track with a power supply cord or convenience recept acle adapter.
9. Do not install the track with electric power connect ed. Similarly, disconnect electricity
when installing or removing fixtures or components or changing the configuration of the
track.
10. Do not attempt to energize anything other than Lighting T rack Fixtures on the track. To
reduce the risk of fire and electrical shock, do not att empt to connect power tools,
extension cords, appliances and the like to the trac k.
SAVE THESE INSTRUCTIONS
HTEK page 1(8)
series Htek
2-circuit 277V Lighting Track
with independent neutra ls
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When installing or using this track system, basic s afety precautions should always be
followed, including the following :
1. Read all of these installation instructions before i nstalling the GLOBAL Htek 277V lighting
track system
2. The GLOBAL Htek 277V track system is intended for use only wit h GLOBAL Htek
components and fixtures marked for use with GLOBAL Htek system. To reduce risk of fire
and electric shock, do not use other components as part of this s ystem.
3. Track installation is to only be performed by a cert ified electrician in accordance with the
National Electrical Code and all local codes and ordinances.
4. The GLOBAL Htek system is designed to be fed by two branch circuit s rated 277VAC,
20A, eg. the system is a two-circuit / two-neutral tr ack and care must be taken to keep
circuits designated as circuit1 and circuit2 s eparate.
5. Do not install the track in damp or wet locations.
6. Do not install any parts of the track system less than 8 ft above t he floor.
7. Do not install any fixtures closer than six inches f rom combustible materials.
8. Do not use this track with a power supply cord or convenience recept acle adapter.
9. Do not install the track with electric power connect ed. Similarly, disconnect electricity
when installing or removing fixtures or components or changing the configuration of the
track.
10. Do not attempt to energize anything other than Lighting T rack Fixtures on the track. To
reduce the risk of fire and electrical shock, do not att empt to connect power tools,
extension cords, appliances and the like to the trac k.
SAVE THESE INSTRUCTIONS
HTEK page 1(8)
GES 208 (8ft) GES 208 (8ft)
one one--circuit track, surface circuit track, surface
mount mount
GES 212 (12ft) GES 212 (12ft)
GET 304 (4ft) GET 304 (4ft)
GET 308 (8ft)
two two--circuit track, surface circuit track, surface
mount mount
GET 312 (12ft) GET 312 (12ft)
IMPORTANT SAFETY INSTRUCTIONS
Read All Instructions Before Installation Read All Instructions Before Installation

The GLOBAL trac
eco
system is intended for use with GLOBAL trac
eco
components and fixtures marked for use with the GLOBAL trac
eco
system. To reduce the risk of fire and electric shock, do not use other
components as part of this system.

Track installation is only to be performed by a certified electrician in
accordance with the National Electrical Code and all local codes and
ordinances.

Single-circuit system: The
eco
GES track system is designed to be
supplied by a single 120 volt branch circuit with a maximum capacity of
20 amps.
Two-circuit system: The
eco
GET track system is designed to be
supplied by a balanced 120/240 volt, three-wire branch circuit with a
maximum capacity of 40 amps.

Do not use this track system with a power supply cord or convenience
receptacle adapter.

Do not install any fixtures closer than six inches from combustible
materials.

Do not install the track in damp or wet locations.

Do not install the track with electric power connected. Similarly,
disconnect electricity when installing or removing fixtures or components
or changing the configuration of the track.

Do not attach anything other than UL listed lighting fixtures marked for for for for
use with Nordic Aluminium GLOBAL trac
h Nordic Aluminium GLOBAL trac h Nordic Aluminium GLOBAL trac
use w h Nordic Aluminium GLOBAL trac
eco
system only
system only system only
system only
to the track.
IMPORTANT
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK
CONFIGURATION CONFIGURATION CONFIGURATION CONFIGURATION
INSTALLATION INSTALLATION INSTRUCTIONS INSTRUCTIONS
eco
GLOBAL
eco
Feed and Connector Components
The GLOBAL trac
eco
system includes the following feed and connector components:
GES single-circuit GET two-circuit
system system
Live end feeds
For feeding power to surface mounted track
from the end. Typically used in conjunction
with a GES 15 Feed Canopy Cover.
Straight feed connectors
For feeding power to surface mounted track
in the middle of two runs. Typically used in
conjunction with a GES 15 Feed Canopy Cover.
Adjustable L-connectors
For connecting two lengths of track in an
L-shape. Can be field adjusted to branch
left or right. Can also be used as a feed
connector.
T-connectors
For connecting three tracks in a T-shape. The GES 40
can be field adjusted to be an inside or outside,
left or right Tee. In the case of two-circuit, the GET 39
or GET 40 must be selected for left or right Tee
connection. Can also be used as a feed connector.
X-connectors
For connecting four lengths of track in an X-shape.
Can also be used as a feed connector.
Linear coupler
For connecting two lengths of track in a linear
configuration.
Floating Feed
For feeding power to surface mounted track at any
point along the length of the track.
Surface conduit feed
For feeding track at the end with horizontal conduit run.
Compatible with 1/2 inch conduit fitting.
Flexible connector
For connecting two lengths of track at
any angle, providing the ability to also
connect two tracks at unequal elevation
or in two different planes.
Dead end cover
For all open ends of track
Nordic Aluminium Inc
4300C Bankers Circle, Doraville, GA, 30360, Tel: 770-326-3331, Fax: 770-326-3353
GES 11
GES 14
GES 34
GES 40
GES 38
GES 21
GES 67
GES 13
GES 23
GES 41
GET 11
GET 14
GET 34
GET 39
GET 40
GET 38
GET 21
GET 67
GET 13
GET 23
GES 41
1:1
1:1
1:1
1:1
1:1
track
track track
track
1:1
1:1
1:1 1:1
1:1
1:1
1:1
1:1
1:1
1:1 1:1
1:1
1:1
1:1 1:1
D2
23
4a
GES 204 (4ft GES 204 (4ft
GES 208 (8ft) GES 208 (8ft)
one one--circuit track, surface circuit track, surface
mount mount
GES 212 (12ft) GES 212 (12ft)
GET 304 (4ft) GET 304 (4ft)
GET 308 (8ft)
two two--circuit track, surface circuit track, surface
mount mount
GET 312 (12ft) GET 312 (12ft)
IMPORTANT SAFETY INSTRUCTIONS
Read All Instructions Before Installation Read All Instructions Before Installation

The GLOBAL trac
eco
system is intended for use with GLOBAL trac
eco
components and fixtures marked for use with the GLOBAL trac
eco
system. To reduce the risk of fire and electric shock, do not use other
components as part of this system.

Track installation is only to be performed by a certified electrician in
accordance with the National Electrical Code and all local codes and
ordinances.

Single-circuit system: The
eco
GES track system is designed to be
supplied by a single 120 volt branch circuit with a maximum capacity of
20 amps.
Two-circuit system: The
eco
GET track system is designed to be
supplied by a balanced 120/240 volt, three-wire branch circuit with a
maximum capacity of 40 amps.

Do not use this track system with a power supply cord or convenience
receptacle adapter.

Do not install any fixtures closer than six inches from combustible
materials.

Do not install the track in damp or wet locations.

Do not install the track with electric power connected. Similarly,
disconnect electricity when installing or removing fixtures or components
or changing the configuration of the track.

Do not attach anything other than UL listed lighting fixtures marked
for
for for
for
use with Nordic Aluminium GLOBAL trac
h Nordic Aluminium GLOBAL trac h Nordic Aluminium GLOBAL trac
use w h Nordic Aluminium GLOBAL trac
eco
system only
system only system only
system only
to the track.
IMPORTANT
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WHEN
ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK ADDING FIXTURES OR CHANGING THE TRACK
CONFIGURATION
CONFIGURATION CONFIGURATION
CONFIGURATION
INSTRUCTIONS
GLOBAL
eco
Feed and Connector Components
The GLOBAL trac
eco
system includes the following feed and connector components:
GES single-circuit GET two-circuit
system system
Live end feeds
For feeding power to surface mounted track
from the end. Typically used in conjunction
with a GES 15 Feed Canopy Cover.
Straight feed connectors
For feeding power to surface mounted track
in the middle of two runs. Typically used in
conjunction with a GES 15 Feed Canopy Cover.
Adjustable L-connectors
For connecting two lengths of track in an
L-shape. Can be field adjusted to branch
left or right. Can also be used as a feed
connector.
T-connectors
For connecting three tracks in a T-shape. The GES 40
can be field adjusted to be an inside or outside,
left or right Tee. In the case of two-circuit, the GET 39
or GET 40 must be selected for left or right Tee
connection. Can also be used as a feed connector.
X-connectors
For connecting four lengths of track in an X-shape.
Can also be used as a feed connector.
Linear coupler
For connecting two lengths of track in a linear
configuration.
Floating Feed
For feeding power to surface mounted track at any
point along the length of the track.
Surface conduit feed
For feeding track at the end with horizontal conduit run.
Compatible with 1/2 inch conduit fitting.
Flexible connector
For connecting two lengths of track at
any angle, providing the ability to also
connect two tracks at unequal elevation
or in two different planes.
Dead end cover
For all open ends of track
Nordic Aluminium Inc
4300C Bankers Circle, Doraville, GA, 30360, Tel: 770-326-3331, Fax: 770-326-3353
GES 11
GES 14
GES 34
GES 40
GES 38
GES 21
GES 67
GES 13
GES 23
GES 41
GET 11
GET 14
GET 34
GET 39
GET 40
GET 38
GET 21
GET 67
GET 13
GET 23
GES 41
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1 1:1
1:1
1:1
1:1
1:1
1:1
1:1 1:1
1:1
1:1
1:1
1:1
)