Delete User Cards
Programming Step
Enter Program Mode
Delete Card : By read Card
OR
*(Master Code)#
2 (Read card )#
Repeat Step 2 for additional user cards
Keystroke Combination
Delete Card : By user ID
OR
2 (User card )#
The User ID is any number from 1-2000.
Delete Card : By Card Number
2 (Input 8/10 digit card number)#
Set Relay Configuration
The relay configuration sets the behavior of the output relay on activation.
Programming Step
Enter Program Mode
Pulse Mode
OR
*(Master Code)#
3(1-99)#
The relay time is 1-99 seconds.
Default is 5 seconds
Keystroke Combination
Latch mode
3 0 #
Set the relay to ON/OFF Latch mode
Exit
*
Set Strike-out Alarm
The strike -out alarm will engage after 10 failed card attempts, factory is OFF, The
strike-out alarm can be set to deny access for 10 minutes after engaging or it can
be set disengage only after entering a valid card or Master code
8
www.nordencommunication.com
