
11
P2M029STD - Ver.1.2
GB
Troubleshooting
Fault
Potential Failure
Problem solving action
The appliance is not
working
The unit is not switched on
Check the unit is plugged in correctly
and switched on
Plug and/ or lead are damaged
Call your agent or qualified technician
Fuse in the plug has blown
Replace the fuse (UK Plug)
Power supply
Check power supply
The appliance turns
on, but the
temperature
is too high/ low
Too much ice on the evaporator
Defrost the appliance
Condenser blocked with dust
Call your agent or qualified technician
Doors are not shut properly
Check doors are shut and seals are not
damaged
Appliance is located near a heat
source or air flow to the condenser is
being interrupted
Move the refrigerator to a more
suitable location
Ambient temperature is too high
Increase ventilation or move appliance
to a cooler position
Unsuitable foodstuffs are being
stored in the appliance
Remove any excessive hot foodstuffs
or blockages to the fan
Appliance is overloaded
Reduce the amount of food stored in
the appliance
The appliance is
unusually loud
Loose nut/ screw
Check and tighten all nuts and screws
The appliance has not been installed
in a level or stable position
Check installation position and change
if necessary
The appliance is
leaking water
The appliance is not properly leveled
Adjust the screw feet to level the
appliance (if applicable)
The discharge outlet is blocked
Clear the discharge outlet
Movement of water to the drain is
obstructed
Clear the floor of the appliance (if
applicable)
The water container is damaged
Call your agent or qualified Technician
The drip tray is overflowing
Empty the drip tray (if applicable)
Summary of Contents for 700l Refrigerator
