Nordcap 458200002, Installation Manual

Page: 14 / 56

7
Remove protective film from product.
This may cause unpleasant static electricity discharge which, however, is not dangerous.
The inconvenience is reduced or prevented by continuously holding the refrigerator with one hand or
grounding the package.
The electrical mains cables must be correctly sized and selected based on the installation conditions.
The +2°C/+10°C models have 3m of single phase cable (3G 1,5mm²) with a SCHUKO type plug.
The -20°C/+5°C models have 3,5m of single phase cable (3G 2,5mm²) without plug.
Check and verify that the line voltage corresponds to that found on the technical specifications plaque on the
unit.
Then insert the plug into the current tap.
Now the installation has come to end.