3
G E N E R AL M AI N T E N AN C E .
3.1 COOLER CLEANING.
The cooler must be cleaned after unpacking it, and before plugging it in. The following directions
are indicated for this purpose:
-
Water and neutral non-abrasive detergents (do not use abrasive or chlorine products)
-
Wash with a piece of cloth or a sponge
-
Frequency: weekly (recommended).
3.2 REPARATION
If any reparation has to be done in the machine, this has to be realized outside the premises,
except electric elements.
Only homologated and specialized technicians must repair the machine, and following all
manufacturer´s recommendations.
3.3 GUIDE TO DETECT OPERATIONS PROBLEMS
PROBLEM
CAUSA PROBABLE
ACTION
The machine doesn´t
cool
There´s no power supply
Make sure that the plug, fuse
and wall plug work. correctly
The machine doesn´t
reach the set
temperature
The unit is located in a hot place or there´s
no enough air passing through the
condenser..
Check the minimum distances
the cooler must keep on the
back and sides (see point 2.2).
Make sure the door closes
perfectly.
There´s too much
condensation incide
the cooler
The door is not close properly
Verify the door is totally closed.
Chack the door seals and its
suspension.
Cooler is too noisy
The cooler is not leveled
Unscrew the legs up to the
machina is totally leveled.
In case any other incidence contact technical service
Note: The manufacturer saves himself the right to do modifications without previous notice.
7
