EN
4
Installation
4.1
Moving
Proceed as follows to remove the packaging from the appliance
–
Move the appliance near the place of installation
–
Steer the forks (1) of the pallet transporter under the appliance and lift it just clear of the floor
–
Remove the screws (2) from all the corner panels (3) and remove the corner panels from the pallet
–
Lower the appliance to the floor and carefully manoeuvre it clear of the forks of the pallet transporter
1
2
3
1
Fig. 8
–
Unscrew the screws (6) and remove the two cross plates (7) from the pallet
–
Very carefully tilt the appliance to the left and remove the right side of the pallet (8)
–
Lower the appliance to the floor again, taking care not to damage the feet or the bottom
–
Tilt the appliance to the right and remove the left side of the pallet (9).
7
6
5
4
Fig. 9
a
WARNING!
While moving the appliance, take great care to prevent it falling over.
10
