Nordcap 406600899, Service Manual

Page: 24 / 67

24
LIBERO LINE FRY TOP INDUCTION
3 USE OF APPLIANCE
3.1 OPERATING INSTRUCTIONS
Please refer to the Installation and Operating Manual of the appliance; the document is available for authorized
technicians on the web sites (PRIDE-SERVICE PORTAL- AGELUX etc..) In case of any doubt, refer to your
local country customer care.
3.2 CLEANING
3.2.1 COOKING TOP SURFACE
Turn off the appliance after service and let the appliance cool down or use the specific button (refer to the
§ CONTROL PANEL INTERFACES) to set the correct temperature to be used for cleaning the cooking surface
(180C°).
Do not use sharp blades to cut foodstuff directly onto the cooking surface; pay attention to not scrape the
corners of spatula blades onto the top surface.
Do not pour large amounts of cold water / ice onto the hot cooking top as thermal shock can damage the top’s
material.
Refer also to the §
PERSONAL PROTECTION EQUIPMENT when cleaning hot surfaces.
- With a dedicated specific cleaning detergent (Rapid Grease C41) follow the procedure instructions of the
detergent.
- With other detergents, follow the instructions contained in the safety data sheet relative to that product.
- Do not use abrasive or corrosive detergents as they could damage the surfaces by mechanical aggression
(scratches) or chemical aggression (corrosion/stains).
CAUTION!
All operations must be carried out following indications at § PERSONAL PROTECTION EQUIP-
MENT and/or referring to the safety data sheet of products involved during this phase.
CAUTION!
Risk of damage to the machine
Do not pour ice / cold liquids etc. onto a heated appliance, the thermal shock could cause damage
to the appliance