Nordcap 406600899, Service Manual

Page: 22 / 67

22
LIBERO LINE FRY TOP INDUCTION
2.2.2 RESIDUAL CURRENT
The contact opening max. distance and leakage current must comply with the local safety regulations.
Many countries use a 30mA, but you must refer to the local regulations!!
2.3 FIRST START UP
Once that all the supplies connections have been carried out it’s time to start up the appliance.
Remove the entire protective film from all the
paneling’s; the protective film can be easily removed when the
appliance has not been heated up. If the appliance is run for a long period without removing the protective film
the film could melt and then be difficult to remove / damage the
paneling’s finishing.
2.3.1 DAILY STARTUP
Before you turn on the appliance make sure that:
The mains voltage and frequency match those indicated on the appliance data plate at §
DATA PLATE (IDEN-
TIFICATION STICKER). Visual check if the supply cable is in good condition.
2.3.2 PRECAUTIONS DURING USE